Yours Truly. 
Here's Ning.
The purpose of this project was to thin out the bamboo. It is surrounded by a buried 3 foot deep heavy gauge plastic barrier, to prevent growing into the neighbor's yard. The cluster has been growing about 7 years. It's been thinned a couple of times. Now it's much to thick, and the individual poles don't stand out. I removed about 1/2. The variety is "Phyllostachys aureosulcata aureocaulis"Here's another description of this cultivar.
This is a great "sustainable gardening" or "permaculture" plant, as long as it's growth is controlled. This is more tomato-posts and other plant stakes than I'll need for the next few years. I'll let them dry and store them until needed.
Support for grapevines. A few weeks ago, I thinned the grove of Timber Bamboo. This is supposedly Phyllostachys vivax but I'm not sure. After procrastinating for months, about adding some supports for the grapevines on the side of the arbor, I trimmed 2 of the harvested culms drilled a small hole in each, and fastened them to the arbor with screws. The supports are sturdy, and a bit flexible. About 15 minutes of work.
Inside the arbor. It's difficult to see, due to the lush grapevines. These now provide shade from the hot Western sun. It was almost instantly cooler once I had them in place and tied the sprawling vines to the supports. This definitely qualifies in the "cheap + lazy" category, and given that no trees were cut down, no trucks used for transport, no energy used in lumber mills, is also a green thing to do.
Tamara. This has long been my favorite. See below for Tranquility, which is giving Tamara a run for it's money. A David Austin "English Rose". Very, very fragrant.
Scepter'd Isle. Also a David Austin "English Rose:. Nice and fragrant.
Red Masterpiece. Sold as a hybrid tea, and has a hybrid tea scent. Very vigorous. More of a 'grandiflora' habit - big, many blossoms per bunch. A few years ago, I threw some prunings behing a new retaining wall. They were buried in fill soil. The prunings grew up through the soil, and became big bushes that are also blooming nicely.
Rustled Rose. This is a very fragrant purple rose that was 'rustled' by taking a cutting. It looked abandoned, growing by a telephone pole on a Portland street. The original bush is gone now. Not too vigorous, and susceptible to blac spot, but VERY fragrant. Fruity, berry fragrance.
Scentimental. Prolific.
Yellow "rustled rose". This was grown as a cutting from a bouquet of flowers that was brought into work by a coworker. It took about 4 years to reach good blooming size, and still isn't large. Looks like a hybrid tea type, and has mild hybrid tea fragrance. Looking in rose books, it might be "Graceland" but there are so many similar roses, it's hard to say.
Tranquility. From cutting-grown plant bough from Heritage Roses in St. Paul Oregon. I have not seen another rose exactly this color. Very fragrant and prolific. It was slow to reach blooming size, but is not very vigorous and prolific. No black spot so far.
Hardy Chicago. I'm not sure what caused the spots on the first leaves. The newer leaves don't have them. A couple of branches are at the 6-leaf stage, so I nipped out the terminal bud to encourage formation of figs. If the first leaves are very small, I didn't count them. If about 1/2 size, I did.
Lattarula. Very late start, None of the branches are at the 5-6 leaf stage yet, and many of the leaves are small. This tree suffered the most from the leaf drop.
Vancouver. This tree was the fastest to grow. About 1/3 of the branches are at the 5-6 leaf stage. The leaves are starting to grow out normal sized as well. There is one breba. This is the only tree with a remaining breba. That's not too much of a loss, since brebas have not been very successful anyway.
Petite negri. This tree had a number of brebas but they all fell off. Only a few branches are at the 6 leaf stage.
Desert King sapling, planted this winter. It is surrounded by bean plants, about the same size. Each branch is about 6 inches long, with multiple leaves, about 1/2 the size that I expect ultimately.
Framing and pocket door installation finished. None of this was as bad as I worried. The pocket door part was actually fairly easy. Here it is, 1/2 way open. I used the level about a zillion times to make sure that it was plumb.
Now the wall has wallboard. I waited for the inspector's OK (verbal) for this. I was tired of the bedroom feeling like a construction site. Not completely done (wait for the NEXT inspection) but now feels like a bedroom again. Actually makes the room feel bigger, for some reason.
The pocket door actually works. Amazing. Also amazing, I actually remembered to get 1 1/8" drywall screws, and they didnt go through the pocket door frame. All-in-all, this part worked out nicely.
The photo is a bit distorted - the posts are actually parallel and vertical. The city had sent me a threatening letter, stating get it inspected or get a big fine. So I got it inspected. The inspecter said that he couldn't renew the permit unless I did a couple more things, mainly improve the joist strength. I had installed 1 2X10; he said that I needed to pair them. So here it is. You cant see in the photo, but the 2X10 at the top is paired, and the posts are bolded into the concrete floor. Also, nat as difficult as I had worried, and I didn't crack or damage the floor. This basement room is looking strange now, but it want from ugly-finished to just ugly over the past few years. Someday, when everything else is done, maybe it will be another bedroom and these posts will be part of a clost door frame....
