Showing posts with label ashes. Show all posts
Showing posts with label ashes. Show all posts

Monday, November 12, 2018

Firewood and Wood Ashes. 11.12.18

Rufus keeping warm by the woodstove.  11.12.18
Over the years, we've had many trees fall on our 2-acre property.  Most have been scrubby, especially cascara trees with trunks about 1 foot thick at the base, tapering up the trees' approximately 30 foot height.  I've also collected some trimmed branches with dimensions that fit in to the woodstove.  We use the cut pieces to supplement the house's heat.  The woodstove makes a big difference, keeping the house warm on cold days.

After the wood is burned, I collect the ashes and spread on the yard and garden.  I avoid spreading ashes on areas where acidic soil is preferred, such as near chestnut trees, or near rhododendrons, or where I will plant potatoes next season.  Those plants do not appreciate alkaline conditions or wood ashes.

This is where a soil test is handy.  Our soil was quite low in calcium, then magnesium.  Wood ashes are alkaline, so can buffer an acidic soil.    Their major component is calcium carbonate - so they have an effect similar to lime, although not as strong as lime.  Wood ashes contribute calcium to soil, then potassium and phosphorus, and some magnesium.   Ed Hume recommends spreading ash around trees and shrubs.  I avoid around acid-loving plants, like chestnut trees, rhododendrons, azaleas, or evergreens, as well as where I will grow potatoes next season. Ed Hume recommends 1 gallon of dry wood ashes per square yard of garden, or 1/4 to 1/2 inch on lawns and flower beds.  Farmer's Almanac recommends 20 pounds per 1000 square feet, which would be 2 pounds per 100 square feet, or 1 pound per 50 square feet - a 5 foot by 10 foot bed.  I apply less, figuring I don't want to overdo it.  I just use a dusting on the vegetable beds for next year, and on lawn around fruit and specimen trees.  Less than the recommend 1/4 inch, so I doubt any problem will occur.

My philosophy is that the trees and garden are already goring nicely.  By adding ashes, I'm returning some of the minerals that trees and vegetables have removed from the soil.  That will help growth in future years. Our soil is high in potassium, the next ingredient that is high in wood ashes, so that aspect is not needed.  The magnesium and phosphorus content of ashes is not much, but would be helpful.as well.

Sunday, December 01, 2013

Wood Ashes / Sustainable Gardening

File:Log in fireplace.jpg
image via commons.wikimedia.org


One of these days I need to get the soil tested.  I could not identify a WA State agency that tests soil.  On a WSA website there is a list of private companies that test soil, but it was so complicated I gave up.


Meanwhile, I don't want to waste potential soil nutrients.  I think compost is generally well balanced, if it comes from kitchen and garden waste.  The raised beds contain a mixture of local soil - mole hills I collect from the 2 acres of lawn, finely ground by the little animals - and commercial compost by the truckload. Somewhere around 1/2 to 1/3 commercial compost.  The lower part of the raised beds is inverted sod, obtained from planting trees and shrubs around the yard; and weeds or rotting straw mulch.  I let the worms and fungi compost that in situ.

Meanwhile, on weekends we heat the house using a wood stove.  In general terms, the resultant ash consists of most of the nutrients a plant needs to make wood, at least, in concentrated form.  Oregon State University Extension site states wood ashes contain the 13 most needed minerals.  Nitrogen and sulfur are lost as gases.  With acid rain, sulfur is not usually in short supply but could be supplemented using epson salts.  Nitrogen could be supplemented using fish emulsion or, if the situation permits, fresh urine, 10:1 dilution in water. This last - saves on groundwater waste (flushing) - from this website, "Many toilets use between 50 and 100 litres of water a day to flush approximately 1.5 litres of pee. The average person has five wees a day and the average flush uses eight litres of water - that's 40 litres.".  I understand that last may be off-putting, but that's water I can use in the summer for watering vegetables trees fruits flowers shrubs; saves on groundwater and reduces salination of the drainage field and nitrogenous pollution of groundwater.

According to the OSU site, " The fertilizer value of wood ash depends on the type of wood. According to Sullivan, hardwoods produce about three times the ash and five times the nutrients per cord as softwoods. A cord of oak provides enough potassium for a garden 60 by 70 feet. A cord of Douglas fir ash supplies enough potassium for a garden 30 by 30 feet."  Areas to consider ash include  "As a general rule, acid soils that would benefit from ash application are usually found in those places in Oregon that get more than 20 inches of rain per year.  I could add to that, the effect of watering the raised beds through the summer, would also leach soluble nutrients, and nutrients are lost from the soil via vegetable harvests and plant materials that are removed.  Those plant material nutrients do get returned to the garden as compost.

According to the Ed Hume website,  Phosphorus content usually ranges between 0.8% - 3%, potassium from 2.8% - 8.6%, calcium from 14%-28%, magnesium from 0.8%-2.8% and sulfur from 0.3%-0.5%.  I imagine softwood ashes are at the low end of that, so N:P:K roughly 0:1:3 or something like that, with additional Ca and Mg.  I was thinking about adding Mg via Epsom Salts but with the firewood ash, that would not appear needed.  The Purdue website states trace minerals include " micro-nutrients such as iron, manganese, boron, copper and zinc. Trace amounts of heavy metals such as lead, cadmium, nickel and chromium also may be present."  I figure the bad ones, if present in cordwood, are everywhere else as well, so are not a concern for me.

I really should get the soil tested.  I may try this siteOr this one - maybe better.

They also comment that " One-half to one pound of wood ash per year is recommended for each shrub and rose bush"

We use locally available wood, which is mostly softwood.  I doubt that we go through 1/4 cord in a winter.  The 30 X 30 ft calculation is 900 sq feet  My raised beds when completed will be approx. 12 X 4 X 8 = 384 sq feet.  The rest of the 2 acres is orchard, grass, and bushes and trees.    So for the raised beds, roughly 1/3 of the winter's ashes could go on the beds, with the remainder spread around the wider area of the orchard and grass/trees/shrubs.


In practice, I can't calculate it closer.  What I'm doing now is spreading a weekend's ashes on each unused raised bed, once for the winter.  The woodstove season extends more than 12 weekends, so I think that's safe.  The rest is scattered in a different area of orchard, or around bushes and trees, a fine dusting, each weekend.  Not around acid loving plants like conifers, blueberries, rhododendrons, camelias; or around potatoes.  I like that the atoms from trees, burned in the fireplace, can become atoms it the trees I'm growing.

Random thoughts, on a chilly rainy late fall morning.