Saturday, November 30, 2013
Friday, November 29, 2013
Quince Fruit
Nearing Completion of Raised Bed Garden
I bought the wood last week. This time there will be one 4 X 8 bed and one 2 X 8 bed. In the location where I want to finish installing raised beds, that is how the spacing works out.
Yesterday I cut the wood. It's easy on a table saw. Two 2 X 6 X 8 ft long planks were cut into 4 foot sections, and one into 2 foot sections. For the corners, a 2 X 4 was cut into 11 inch sections.
This morning I thought, I'm in no hurry. I'll see if I can pre-drill the corners.
That wasn't too bad. So I used 3 inch deck screws to assemble them. I discovered, it's easier if I remain standing and use something as a workbench, which was the cage that was sitting there anyway.
That wasn't too bad, so I cut woven plastic feed bags and stapled them to the inside, and the bottom edge, for liner. We've been saving them for that purpose.
I don't know if the liner will make them last longer. But that's why I'm using it. I don't want to use preservative chemicals or paint. The liner is free and otherwise would have gone into the landfill.
I thought I only had enough for one bed, so completed the narrow one. Later Ning told me he had more chicken feed bags but I was too tired to work on the other bed.
Last, I cut sections of chicken wire. In previous posts, I used hardware cloth. Hardware cloth has smaller holes and is stronger. It's also more costly. I might regret it but this time I went with chicken wire again.
I did the construction work next to the house. It's easier on a level, paved surface. Then Ning helped me put it on a wheelbarrow and move the bed to its final location.
It's nice having one started now. I can fill it gradually through the winter, no hurry. The usual combination of mile hill soil and compost, roughly 50:50 mix by volume. There are lots of mole hills to collect now. For the bottom layer, there are sod pieces that will compost in place. I put those in upside down. There has not been a problem with them regrowing. Also some pulled weeds.
The 4 X 8 bed required 6 planks. The 2 X 8 bed required 5 planks. For one additional plank, the larger bed has double the growing area.
Yesterday I cut the wood. It's easy on a table saw. Two 2 X 6 X 8 ft long planks were cut into 4 foot sections, and one into 2 foot sections. For the corners, a 2 X 4 was cut into 11 inch sections.
This morning I thought, I'm in no hurry. I'll see if I can pre-drill the corners.
That wasn't too bad. So I used 3 inch deck screws to assemble them. I discovered, it's easier if I remain standing and use something as a workbench, which was the cage that was sitting there anyway.
That wasn't too bad, so I cut woven plastic feed bags and stapled them to the inside, and the bottom edge, for liner. We've been saving them for that purpose.
I don't know if the liner will make them last longer. But that's why I'm using it. I don't want to use preservative chemicals or paint. The liner is free and otherwise would have gone into the landfill.
I thought I only had enough for one bed, so completed the narrow one. Later Ning told me he had more chicken feed bags but I was too tired to work on the other bed.
Last, I cut sections of chicken wire. In previous posts, I used hardware cloth. Hardware cloth has smaller holes and is stronger. It's also more costly. I might regret it but this time I went with chicken wire again.
I did the construction work next to the house. It's easier on a level, paved surface. Then Ning helped me put it on a wheelbarrow and move the bed to its final location.
It's nice having one started now. I can fill it gradually through the winter, no hurry. The usual combination of mile hill soil and compost, roughly 50:50 mix by volume. There are lots of mole hills to collect now. For the bottom layer, there are sod pieces that will compost in place. I put those in upside down. There has not been a problem with them regrowing. Also some pulled weeds.
The 4 X 8 bed required 6 planks. The 2 X 8 bed required 5 planks. For one additional plank, the larger bed has double the growing area.
Thursday, November 28, 2013
Sclumbergeras in Bloom
The Schlumbergeras didn't get much attention this year. I left them on the shady east side of the house and watered when I thought of it. Moved them inside in October.
They bloomed nicely any way. Nice fresh happy flowers for this time of year.
They bloomed nicely any way. Nice fresh happy flowers for this time of year.
Products for pest control, fungal disease, and animal pest repellent.
Bionide Hot Pepper Wax |
Lilly Miller Chelated Iron Plus |
Hot Pepper Wax might be reduce risk for animals chewing on tree bark and stems. Two potential benefits. The wax might have antidessicant properties, reduce frost damage on immature fig shoots. Hot pepper extract might reduce chewing.
So I used up that spray on the fig trees, saturating the bark, the stem tips, and the tree wrap.
I would like to come up with a home remedy. If I can figure out a sprayable wax. Maybe the wax component is minimal, could as well be replaced with canola oil or neem oil.
This summer I noted Ning's ginkgo trees were not as green as the older one I planted. Multiple potential reasons. Ning's ginkgos were grown in container several years, until late last winter. To avoid too much root damage, we left potting soil pretty much in place. Mine was in more of a native soil. I don't remember - if I gave mine some epson salts in the early Spring, too. Maybe. And maybe some fish emulsion.
I also noted mulberry leaves were pale. That may be a mulberry tree characteristic. Or this variety. I was thinking, either magnesium (epson salts) or iron. Or both.
I also read about iron supplements for fig trees, on an internet forum. I was looking for some to apply during late winter. I found this container. So now that's taken care of too. I prefer completely organic, but then how do I dispose of this? It's not herbicide or pesticide, so I will use it up. There isn't much. Later find a completely organic source.
Also thinking about what to use for fungal spots on the bearded iris leaves. This year I did not use anything. The spots were significant by fall. Maybe it doesn't hurt anything. In previous years, neem worked well for leaf spot and for aphids. I found this partially used container. I can use it up in the Spring.
Green Light Neem Concentrate |
Labels:
chewing animals,
deer,
fig,
Fig grove,
Hot Pepper Wax,
iron,
mice,
neem oil,
rabbits,
repellent,
voles,
winter preparation
Subscribe to:
Posts (Atom)