Installing Home-Made Shed Doors. 10.15.2020

 This project is almost done.  The shed needs some clean up and painting, and a garden tool rack.  The biggest job was getting myself in gear to make and install a new set of doors.

I posted earlier about how I made the doors.  I cut them from an available sheet of siding, with 1 x 4 lumber cut to make supporting framing and trim.  Then glued them on, with drywall screws, screwed in from the inside aspect while the glue was wet.  Grout and paint.  

The shed turned out to be leaning, which I can't fix.  I installed the doors level, which meant some creative door hanging.  It came out OK.   It's also not in great condition - it was sat on the bare ground who knows how many years ago.  There is dry rot.  Still, it's a shed, not a house.  Getting it working for a couple of years would be OK. 

Here is how it looks now, with the doors and trim installed and the trim grouted. 

That turned out pretty good.  I saved the 2 x 4 framing from the old door, to make a tool rack.  The rest is falling apart, so the boards go to the wood pile and the siding goes to the trash.

For comparison, here was the shed a few days ago.

If there's another warm sunny day, I can scrape and paint. Otherwise, that part will await Spring.

Yates American Persimmons. Early Harvest. 10.11.2020

 These persimmons are about a month early.  They were already falling off the tree.  Yates is an American persimmon (Diospyros virginiana), so smaller than grocery store Asian persimmons (Diospyros kaki), but with a richer flavor, like apricots with spices and drenched in wildflower honey.  These were just that good.

This tree is fenced, which is good.  I'm sure the critters would have absconded with all of these, leaving me none.

Making New Shed Doors. 10.11.2020

 This shed was on the verge of demolition.  However, it's quite close to my garden and orchard.  It would be nice to store tools in it.  I would spend a lot less time and effort carrying tools across the road from the house.  That would make gardening more pleasant.  We already store straw and some kindling in it.  The door is huge, and very heavy.  It pulled the hinge screws out of the frame.  The door itself is 4 feet wide, 6 feet tall, and has its own frame made from 2 X 4s.  

I think that a scraping and repainting would preserve the shed for another several years, if not a decade.  It needs a new plywood floor.  I can do that.  The inside framing seems fine.  The siding is T1-11, which is bad, but it's a shed, not a house.  I can clean up or replace bad pieces, seal and paint them to last a few more years.

The main problem is that door. It's incredibly heavy, and re-installing it was a temporary measure.  It just pulled the screws out of the frame again.  I decided to make a new one but make two doors, half the width, and without that 2 X 4 framing.  So they will probably weigh about 1/3 to 1/4 as much.  I found a 4 X 8 foot sheet of siding, stored in another shed.  I cut it down to 4 X 6 foot , then cut that into two 2 X 6 foot sheets.  I bought some 1 X 4 boards from Lowes during my last trip there, to cut for framing / trim.

I've been kind of dreading doing this.  It's too many infrastructure projects this year.  However, once starting, it has gone quite fast and not really difficult.  The worst part was moving the big sheet of siding, and cutting it.

Here are the sheets of siding, with the cut 1 X  4 boards arranged like I wanted them.  I used these to add some strength, and help flatten the siding which had a slight, subtle warp.

I numbered the boards and their locations so I wouldn't mess them up when they are glued and screwed together.  One door got numbers, the other got letters.

I used outdoor grade wood glue, and drywall screws.  I screwed them through the back so they would be tight and make a good glue-bond and not show or be exposed to the elements.  Then I used outdoor, paintable caulk to seal all of the nooks and crannies and edges so water wont soak in.

This morning I painted the doors with some left over house paint.  I think there is enough for a second coat, plus paint the entire shed.  Then it will match the house.  It's a darker grey than it looks in the photo.

 

 

Next I need a good dry day to repair and paint the siding above the door, install the new framing, and install the doors.  That will be a good start at having a usable garden shed.

 

Here is the shed as it stands now.   It looks decrepit and shabby.  I think putting on new trim, scraping, applying new paint, and installing the new doors will help a lot.  As it is now, I just lean the old door against it's opening, which is unsafe and looks like something out of Fargo.

Kitchen Curtain for Halloween. Sewing Project. And a Face Mask. 10.6.2020

 I decided to do a little sewing project.  We didn't like the kitchen curtains.  It's just a valence - we don't want to obstruct the view of the back yard and Rufus.  I made these from a Halloween theme cotton fabric.  When Halloween season is done, I'm planning on a set for Thanksgiving.  It's a way to acknowledge and enjoy the holiday and season times, without going all out on buying stuff.

 These were fun to make.  I didn't have a pattern, so I reverse engineered them from an old set.  I don't think I made a lot of mistakes, but there were some learning points.  Next one should go even more smoothly.

I also made some coronavirus face masks using extra from the fabric.  It makes a nice Halloween theme face mask..

Rubinette Apple. 10.2.2020

 This was the first really good crop for Rubinette.  It fruited a little for the past three years, but not much and they were ruined.  I think they had San Jose Scale, which I treated last winter with dormant oil spray.  It worked.  I don't see effects of scale, at least not yet.

Rubinette has a reputation as the best tasting, or one of the best tasting, apples around.  I know, each year there seems to be a new "Best Tasting" apple.  This one really was excellent.  I would at least say it is among the best tasting apples in my orchard.  Truly delicious.  Decent crop this year, too.